DC2 Firmware Update
Instructions:
- Make sure you have a 32GB or less SD card that is either a WiseEye card or one that has been formatted while inside of your camera.
- Download the .zip file from the button above.
- Do not unzip, extract or uncompress the file. The file should be “DC-02-Camera_OTA.zip”. If your computer automatically extracts or opens the file, you will neet to recompress it. This can usually be done by right clicking the file and selecting “Compress” or “Zip”.
- Put the SD card in your computer and open it in a file browser.
- Copy the “DC-02-Camera_OTA.zip” folder onto the main folder of the SD card. DO NOT copy into the DCIM or any other folder of the SD card, the files should be in the same folder as the DCIM folder and not inside any folders.
- Eject/Remove the card from your computer.
- Put the card in the camera and turn to Set Up. You either need good batteries or external power.
- Hit the menu button to open the main menu.
- Go to the “System” menu, which is on the bottom, in the middle.
- Go to “FW Update”.
- Select Software.
- Press OK to confirm.
- Leave the camera alone until it restarts, possibly up to 5-10 minutes.
- Once the camera restarts the firmware update is completed. You can continue to use the card with the update on it without issue.
- When the camera starts you should see the firmware version number at the bottom right on the logo screen. The current number is EA03.